The ecological lime mortar paste Graphenstone for both exterior and interior environments, consist of a mixture of fat lime, obtained from the thermal limestone process in ancient wood stoves, quality (CL90) with crushed aggregate calcium carbonate (purity> 90%) addition, selected siliceous aggregates and inorganic pigments. Graphenstone lime based paste Mortars act as first regulation layer, in order to have more coarse aggregate without coloring. After it, one or two coats, depending on the finishing required, clear or color finish mortar lime paste is applied.
Graphenstone lime based paste Mortars has properties that cannot be obtained naturally with cement or artificial lime. Only pure natural lime allows gas exchange between the inside and the outside of the house. These mortars, in addition to providing greater plasticity and workability, have unique properties such as increased surface area of lime attached to selected particle size, greater flexibility against certain mechanical conditions, high fat lime fineness (1 micron maximum) and maintain hardness and strength over time. It is also permeable to water vapour, has excellent adhesion, no cracks, it absorbs CO2, and acts as insect repellent. Contains graphene.
(*1) Application ratio. The application yields of the products are orientative and have been calculated by Graphenstone laboratories. Each product yield varies depending on the number of layers, type and condition of the substrate. Exact values must be determined by performing in work. (*2) Commercial formats. For commercial formats in your country, please contact your Oficial Distributor. Graphenstone reserves the right to change, modify or delete any commercial format without notice.
Graphenstone mortars are ideal for masonry work finishes such as stucco, continuous and micro cement and / or plaster of new areas and to rehabilitate or consolidate. Mortars offer endless possibilities in textures and colors, such as plaster, stucco or patinas. Ideal for jobs that are close to fine arts and want the finest aesthetics.
Graphenstone lime mortar is 100% natural, and has only graphene as an additive, which provides a strength never seen before in this type of products, similar to a Portland cement, being able to accommodate natural movements of buildings.Higher hydrophobic and anti capillarity properties make this product a perfect fit for buildings requiring structural repairs, humidity control and flexibility. It also has a higher thermal conductivity which drives into higher energy savings. It is suitable for all the above uses, for its restorative contribution, breathability and contributes to improve building health. Especially recommended for sustainable rehabilitation or restoration of historic and heritage buildings.
Graphenstone is the first global manufacturer of organic products with graphene technology such as paints, coatings, mortars, adhesives, and insulating.